Factor 55 00016-01 Hawse 1.0 Fairleads

Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 are CNC machined from 1 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick. The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 fairleads are the industry’s first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles. The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device.

Features

• Machined from 1 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.
• The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against
• The 1.0 fairleads are the industry’s first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles.
• The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through.
• These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.
• Dimensions: 14.25 × 4.5 × 2 in
• Standard 10″ Bolt Mount Spacing
• For synthetic winch rope only.
• Weight: 2.6 lbs
• All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.
• Type III hard anodized finish leaves a .002” thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind

Technical Specs